We all know how to make our beds, but are we doing it correctly?
How many of you can name the three steps that go into the creation of hospital corners? What’s the point of calling them that? That will be addressed. Making a bed, on the other hand, isn’t rocket science, but there are a few key measures to remember if you want to sleep well and comfortably.
This how-to on making your bed will come in handy if your sheets are always tangled around your feet when you wake up in the morning. Sheets twisted together are a pain!
Layers of a Bed
- To conceal the box spring and keep the space under the bed from being visible, use a dust ruffle. A bed skirt is another name for it. There are both ruffled and smoothed-out varieties, which is why the term was chosen.
- Despite the fact that a mattress pad is technically optional, we see it as an essential piece of bedding. The primary function of these comfort layers is to protect the mattress’s fabric, not to soften it. Almost anything can make its way onto your mattress through your bed sheets. Moving or donating your mattress will reveal unpleasant stains from perspiration and other bodily fluids. Protecting the surface with a pad or mattress cover will keep it looking new.
How to Make Your Own Bed
1. Start With a Bed Skirt
If you have an unattractive bed frame or storage boxes under your mattress, a bed skirt might help hide them. Just be sure to iron your bed skirt before using it to avoid creases. Here’s how to put your bed skirt on properly.
A Bed Skirt Tutorial
- Remove your mattress from your bed frame.
- For a full-length skirt, put it over your box spring, aligned with your frame.
- If you have a three-sided elastic bed skirt, line up the skirtless side of your headboard with the skirt.
- Make sure the stitches of your bed skirt are perfectly aligned with the frame of your bed.
- Your mattress should be positioned over the bed’s skirt.
2. Add the Mattress Topper
A mattress topper is a cost-effective solution to transform your bed into a slumbering sanctuary. You may modify your present mattress by adding a few additional inches of comfort to produce a soft and buoyant feel, keeping you cool and snug throughout the night. Just make sure you get a mattress topper with a viscoelastic bottom so that it doesn’t move about as you sleep.
Tips for Using a Mattress Topper
- Use non-slip pads on the top of your mattress to help keep your mattress topper in place if it doesn’t have a viscoelastic bottom.
- Make sure your mattress topper is aligned with your mattress’ four corners before rolling it out on top of it.
- Continually add your bedding as normal.
3. Use a Mattress Protector
Unlike decorative pillows and blankets, a mattress protector is a necessity if you want to keep your bed clean for the long term. The feel and comfort of your sleeping surface won’t be harmed by using a quality mattress protector. The following are some additional advantages of using a mattress protector:
- Protects your mattress from stains and messes
- Prevents blood stains
- Makes it a lot easier to remove urine off your bed.
- Anti-wear and tear properties
- Protects your mattress from dust mites, bacteria, and other allergies.
How to Put a Mattress Protector on Your Mattress
- Begin at the top corner and work down, starting with the uppermost corner of your mattress (and mattress topper if necessary).
- Make sure to tuck in each of the four corners before moving on.
- The rest of your bed linens should be put on in the same manner as usual.
4. Put on the Fitted Sheet
Fitted sheets are the foundation of your bedding and cover your mattress. Make sure you obtain the correct sheet sizes for your bed because fitted sheets are usually sewed with elastic edges that assist keep everything in place.
Putting a Fitted Sheet on Your Bed
- Fitted sheets should be placed on top of your mattress in the same lengthwise arrangement as the mattress itself.
To begin, begin by pulling a corner of a fitted sheet over the side of your mattress.
Make sure that the corner seam of your fitted sheet is aligned with the mattress’s top.
Each of the four corners should be checked to see whether it fell out of place while the next was attached.
5. Put on a Flat Sheet
Flat sheets form a protective layer between yourself and your comforter or duvet, preventing body oils or dirt from transferring to your top layer. But the need for flat sheets is a debated subject — nearly 6 in 10 Americans think flat sheets are essential, while others opt out of flat sheets altogether.
Whether you’re team flat sheet or not, you can’t deny that finding the right material can make all the difference. Whether you prefer breathable percale sheets or irresistibly soft sateen sheets, using the right sheets can help you sleep like a baby.
How to Use a Flat Sheet
- Lay the flat sheet across your bed in the same orientation as your bedding.
- Center the flat sheet on your bed, making sure there’s enough of the sheet to fold under on the sides and end of the bed.
- Check that the top edge of your top sheet is aligned with the top of your mattress.
- Fold the bottom of your top sheet underneath your bedding.
- Do hospital corners with the sides of your flat sheet (see instructions below).
How to Do Hospital Corners
Hospital corners are a type of flat sheet fold that makes your bedding look crisp and neat. Here’s how to fold them perfectly.
- Fold the end of the top sheet under the end of your mattress — the sides should still be hanging loose.
- Grab a piece of the top sheet one to two feet away from the end of the bed. Lift this piece up at a 45-degree angle from the corner of the mattress.
- Lay this piece on top of your mattress, it should make a triangular shape at the foot of your bed. Hold this piece in place, and tuck the excess sheet under your mattress. Try to make sure the excess sheet is tucked neatly, rather than crammed underneath for best results.
- Let the triangle-shaped section down and tuck any edges that hang below your bed underneath the mattress.
6. Place the Comforter or Duvet
The phrase “comforter” and “duvet” are often used interchangeably, however these two sleeping layers are very distinct. A duvet, like a pillow and pillowcases, is made up of an insert and a cover, but a comforter is a single quilted piece of bedding that sits on top of your sheets.
Putting on a duvet cover can be more difficult than washing a duvet, because you have to chuck it in the washer with the rest of the clothing. However, because most people use a flat sheet instead of a duvet, comforters don’t need to be washed as frequently as those that do require special care.
Duvets and comforters: how to put them on
- On top of your bedding, use a duvet or comforter that is aligned with your bed.
- Take a close look at your duvet cover and make sure it covers the entire bed evenly.
- Fold the borders of your duvet or blanket under your bed if you prefer tighter sheets. Leave it as is if you like a more relaxed appearance.
- The pattern on the inside of your sheets can be seen by folding the top sheet and duvet together in your hands.
7. Add Pillows
Bedding embellishment can begin as soon as your linens are in order. When deciding how to make a bed, the size and type of pillows you use might make a difference.
Memory foam is an excellent option for a base pillow, whereas down pillows are ideal for focal pillows because of their lightness and loftiness. To complete the aesthetic of your bed, whether it’s two regular pillows or a pair of Euro pillows that you want, designing your pillows is an essential part of the process.
Putting Pillows on a Bed Correctly
- Grab both sides of your pillows and squeeze them together to fluff them up.
- Pillows should be placed near the head of your bed, between the duvet and the headboard or wall, in order to maximize the space. It is possible to arrange these pillows numerous ways, including stacking them on top of each other, adding throw pillows or using European shams as an additional layer of comfort.
- In order to give the appearance of being lived in, “karate chop” your pillows once they’ve been put in place.
- Throw pillows can be placed in front of your regular pillows.
8. Finish With Throw Blankets on Your Bed
In the morning, what do you do with the throw blankets you use at night? Styling your throw blankets on your bed in a way that is both fashionable and effortless can make them part of your room’s dcor. With a weighted blanket or a soft, cuddly fleece blanket, you may give your bed a finished look that’s both comfortable and stylish.
Throw Blankets on a Bed: How to Put One on
- It’s time to get creative with your throw blanket by folding it in half (or scrunch it up for that organic lived-in look).
- The length of the blanket should span the breadth of your bed, so style it at the foot of your bed.
Making your bed every day will help you feel more energized when you get up in the morning. A good night’s sleep begins with making your bed. Whether you diligently tuck your hospital corners or you simply want your duvet to appear clean at the end of the day, making your bed is the first step.
Is it time to go to sleep? Consider a new set of comfy bedding to improve your night’s rest.
Healthy Bed Habits
Fix Your Bed Every Morning
Wash Your Beddings every 1 to 2 Weeks
Simplify Duvet Layering
Use a Mattress Pad
Frequently Asked Questions
How should I make a hotel-style bed?
How should I make a bed with a footboard?
What can I add to make it comfier?
How can I layer a bed with a quilt?
What are the benefits of making your bed every day?
In light of how much time we spend sleeping, we believe that a well-made bed merits a bit more attention. How many times have you struggled to get into bed because your sheets were twisted or your pillows were all over the place? As an alternative, wouldn’t it be nice to snuggle up in a pristine, cold and tightly tucked duvet cover? It may help you get a good night’s sleep. Tell us if that happens!